Remaining stock
Top seller
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
No results were found for the filter!
NEW
End mill adapter WELDON DIN 69871, SK40-18-160
End mill adapter WELDON, SK40 - DIN 69871 - SK 40 - D1: 18 mm - A: 160 mm
€35.48
*
Stock: 1
NEW
NEW
Collet chuck ER 16 MT 2
Collet chuck ER with morse taper, MT 2 - ER 16 - clamping range 2-10 mm
€50.22
*
Stock: 1
NEW
Collet chuck ER16 cylindrical shank, D:20 / L:100
Collet chuck ER16 with cylindrical shank and mini nut - D: 20 mm - ER 16 - L: 100 mm
€41.58
*
Stock: 1
NEW
Collet chuck ER 25 cylindrical shank, D:32 / L:100
Collet chuck ER 25 with cylindrical shank and standard nut - D: 32 mm - ER 25 - L: 100 mm
€51.55
*
Stock: 1
NEW
Shell mill adapter HSK-A 63, Ø 22 mm / A 100 mm
Combination shell mill adapter, DIN 6358 HSK-A - HSK 63A - balanced G = 6,3 15.000 U/min. - D: 22 mm - A: 100 mm
€63.25
*
Stock: 1
NEW
Shell mill adapter HSK-A 63, Ø 22 mm / A 60 mm
Combination shell mill adapter, DIN 6358 HSK-A - HSK 63A - balanced G = 6,3 15.000 U/min. - D: 22 mm - A: 60 mm
€56.39
*
Stock: 1
NEW
Taper arbor MT 2 with thread 5/8-16
Taper arbor with thread - MT 2 - thread 5/8-16
€11.63
*
Stock: 1
NEW
Taper arbor DIN 238, MT 4 / B 16
Taper arbor with morse taper shank, DIN 238 - completely hardened and ground - MT 4 - Taper B 16
€5.18
*
Stock: 1
NEW
VDI 40 rectangular soft blank, type A1-40-100
Type A1, VDI 40 rectangular soft blank - VDI-Tool holder - material 42 CRMo 4 - type A1-40-100
€101.55
*
Stock: 1
NEW
VDI 40 axial tool holder, left-hand, type C2
Type C2, VDI 40 axial tool holder, left-hand - VDI-Tool holder - type C2-40-20
€62.32
*
Stock: 1
NEW
VDI 20 boring bar holder, type E2-20-12
Type E2, VDI 20 boring bar holder, IC/EC - VDI-Tool holder - type E2-20-12
€42.22
*
Stock: 2
Viewed