No results were found for the filter!
Revolving tailstock centre, series 805 MT 6
High performance revolving tailstock centre, series 805 - type 865 - MT 6 - especially developed for use on NC-machines with draw-off nut - completely hardened and ground - centre tip supported by needle bearings - for high speeds with...
€1,848.82
*
Stock: 2
Revolving tailstock centre, 805 KOP MT 6
High performance revolving tailstock centre, series 805 KOP with extended tip 30°/ 60° - type 856 KOP - MT 6 - especially developed for use on NC-machines with draw-off nut - completely hardened and ground - centre tip supported by...
€1,983.67
*
Stock: 2
Revolving tailstock centre, series 900 MT 2
Precision revolving tailstock centre, series 900 for interchangeable inserts - type 923 - MT 2 - same construction as series 800, but for interchangeable inserts (delivered without inserts!) - centre tip from chromium-alloyed tool steel...
€287.86
*
Stock: 2
Pointed centre for tailstock centres type 923
Pointed centre , interchangeable insert for series 900 - for type 923
€22.90
*
Stock: 5
Hollow centre for tailstock centres type 923
Hollow centre , interchangeable insert for series 900 - for type 923
€27.50
*
Stock: 2
Large pointed centre fortailstock centres type 923
Large pointed centre , interchangeable insert for series 900 - for type 923
€28.94
*
Stock: 3
Taper for tailstock centres type 923
Taper , interchangeable insert for series 900 - for type 923
€34.27
*
Stock: 2
Female taper for tailstock centres type 923
Female taper , interchangeable insert for series 900 - for type 923
€43.49
*
Stock: 2
Copying centre for tailstock centres type 923
Copying centre , interchangeable insert for series 900 - for type 923
€32.18
*
Stock: 5
Tailstock centre MT 2 type 923, set in a box
Tailstock centre, set in a box - precision revolving tailstock centre type 923 MT 2 - incl. 6 interchangeable inserts: - pointed centre - hollow centre - large pointed centre - taper - female taper - copying centre
€521.14
*
Stock: 2
Revolving tailstock centre, series 900 MT 3
Precision revolving tailstock centre, series 900 for interchangeable inserts - type 933 - MT 3 - same construction as series 800, but for interchangeable inserts (delivered without inserts!) - centre tip from chromium-alloyed tool steel...
€324.65
*
Stock: 1
Pointed centre for tailstock centres type 933
Pointed centre , interchangeable insert for series 900 - for type 933
€27.50
*
Stock: 2
Products from Gedema
Viewed