No results were found for the filter!
Mechanical face driver, type D, MT 5
Mechanical face driver MT 5, type D (57-90 mm) Scope of supply: - hydraulic face driver - 1 set driving pins S1 - 1 piece centre S4 Driving pins S1 - S4 are as accessories optional available on request!
€889.49
*
Stock: 2
Mechanical face driver, type C, MT 6
Mechanical face driver MT 6, type C (40-70 mm) Scope of supply: - hydraulic face driver - 1 set driving pins S1 - 1 piece centre S4 Driving pins S1 - S4 are as accessories optional available on request!
€667.15
*
Stock: 1
Mechanical face driver, type D, MT 6
Mechanical face driver MT 6, type D (57-90 mm) Scope of supply: - hydraulic face driver - 1 set driving pins S1 - 1 piece centre S4 Driving pins S1 - S4 are as accessories optional available on request!
€972.94
*
Stock: 1
Revolving tube centre pointed, MT 2
Revolving tube centre pointed MT 2 - hardened and ground - Ø 135 mm
€616.75
*
Revolving tube centre pointed, MT 3
Revolving tube centre pointed MT 3 - hardened and ground - Ø 135 mm
€754.63
*
Stock: 1
Revolving tube centre pointed, MT 4
Revolving tube centre pointed MT 4 - hardened and ground - Ø 135 mm
€840.89
*
Stock: 1
Revolving tube centre pointed, MT 5
Revolving tube centre pointed MT 5 - hardened and ground - Ø 158 mm
€943.27
*
Stock: 1
Revolving tube centre pointed, MT 6
Revolving tube centre pointed MT 6 - hardened and ground - Ø 158 mm
€970.20
*
Stop screw for 5C collets
Stop screw for 5C-collets - thread hardened over entire length - for adjustable work piece depths up to 75 mm (from collet surface)
€8.50
*
Stock: 39
Collet 161E Ø 10,0 mm
Collet round, DIN 6343, Type 161E - 0,5 mm stepped - radial grooved - Ø 10,0 mm
€23.26
*
Stock: 3
Collet 161E Ø 10,5 mm
Collet round, DIN 6343, Type 161E - 0,5 mm stepped - radial grooved - Ø 10,5 mm
€23.26
*
Collet 161E Ø 11,0 mm
Collet round, DIN 6343, Type 161E - 0,5 mm stepped - radial grooved - Ø 11,0 mm
€23.26
*
Products from Gedema
Viewed