No results were found for the filter!
Heavy duty tailstock centre Bison type 8814-4
Heavy duty tailstock centre - with extended point - Bison type 8814 MT 4 - standard version - DIN 228
€114.00
*
Heavy duty tailstock centre Bison type 8814-5
Heavy duty tailstock centre - with extended point - Bison type 8814 MT 5 - standard version - DIN 228
€192.00
*
Heavy duty tailstock centre Bison type 8814-6
Heavy duty tailstock centre - with extended point - Bison type 8814 MT 6 - standard version - DIN 228
€405.75
*
Heavy duty tailstock centre Bison type 8815-1
Heavy duty tailstock centre - with draw off nut - Bison type 8815 MT 1 - standard version - DIN 228
€81.00
*
Heavy duty tailstock centre Bison type 8815-2
Heavy duty tailstock centre - with draw off nut - Bison type 8815 MT 2 - standard version - DIN 228
€87.75
*
Heavy duty tailstock centre Bison type 8815-3
Heavy duty tailstock centre - with draw off nut - Bison type 8815 MT 3 - standard version - DIN 228
€108.75
*
Heavy duty tailstock centre Bison type 8815-4
Heavy duty tailstock centre - with draw off nut - Bison type 8815 MT 4 - standard version - DIN 228
€135.00
*
Heavy duty tailstock centre Bison type 8815-5
Heavy duty tailstock centre - with draw off nut - Bison type 8815 MT 5 - standard version - DIN 228
€216.00
*
Heavy duty tailstock centre Bison type 8815-6
Heavy duty tailstock centre - with draw off nut - Bison type 8815 MT 6 - standard version - DIN 228
€445.50
*
Tap holder 10 x 3,5
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 10 mm Internal- Ø 3,5 mm
€32.54
*
Stock: 3
Tap holder 10 x 4,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 10 mm Internal- Ø 4,0 mm
€32.54
*
Stock: 24
Tap holder 10 x 4,5
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 10 mm Internal- Ø 4,5 mm
€32.54
*
Stock: 14
Products from Gedema
Viewed