No results were found for the filter!
Hollow spindle stop, spindle-Ø 58 - 76
Hollow spindle stop - useful auxiliary tool suitable for almost every lathe - worthwhile even for small series production - expensive set-up time can be reduced to a minimum - quick and easy fixing at any position of the hollow spindlle...
€149.90
*
Stock: 41
Hollow spindle stop, spindle-Ø 75 - 96
Hollow spindle stop - useful auxiliary tool suitable for almost every lathe - worthwhile even for small series production - expensive set-up time can be reduced to a minimum - quick and easy fixing at any position of the hollow spindlle...
€167.69
*
Stock: 44
Test arbor DIN 69880, VDI 16
Test arbor VDI 16 - DIN 69880 - wooden case and calibration certificate upon request
€192.31
*
Stock: 10
Test arbor DIN 69880, VDI 20
Test arbor VDI 20 - DIN 69880 - wooden case and calibration certificate upon request
€202.46
*
Stock: 3
Test arbor DIN 69880, VDI 25
Test arbor VDI 25 - DIN 69880 - wooden case and calibration certificate upon request
€230.33
*
Stock: 6
Test arbor DIN 69880, VDI 30
Test arbor VDI 30 - DIN 69880 - wooden case and calibration certificate upon request
€218.38
*
Stock: 12
Test arbor DIN 69880, VDI 40
Test arbor VDI 40 - DIN 69880 - wooden case and calibration certificate upon request
€230.90
*
Stock: 7
Test arbor DIN 69880, VDI 50
Test arbor VDI 50 - DIN 69880 - wooden case and calibration certificate upon request
€261.14
*
Reducing sleeve 12/3 mm
Reducing sleeve for hydraulic expansion mandrels, D 12 mm, bore- Ø 3 mm - for diameter reduction of hydraulic expansion mandrels - mechanically sealed up to 60 bar
€43.06
*
Stock: 1
Reducing sleeve 12/4 mm
Reducing sleeve for hydraulic expansion mandrels, D 12 mm, bore- Ø 4 mm - for diameter reduction of hydraulic expansion mandrels - mechanically sealed up to 60 bar
€43.06
*
Stock: 2
Reducing sleeve 12/5 mm
Reducing sleeve for hydraulic expansion mandrels, D 12 mm, bore- Ø 5 mm - for diameter reduction of hydraulic expansion mandrels - mechanically sealed up to 60 bar
€29.59
*
Stock: 2
Reducing sleeve 12/6 mm
Reducing sleeve for hydraulic expansion mandrels, D 12 mm, bore- Ø 6 mm - for diameter reduction of hydraulic expansion mandrels - mechanically sealed up to 60 bar
€29.59
*
Stock: 2
Products from Gedema
Viewed