Sleeves and arbors
Top seller
No results were found for the filter!
Taper arbor DIN 238, MT 5 / B 16
Taper arbor with morse taper shank, DIN 238 - completely hardened and ground - MT 5 - Taper B 16
€15.91
*
Stock: 38
Taper arbor DIN 238, MT 5 / B 24
Taper arbor with morse taper shank, DIN 238 - completely hardened and ground - MT 5 - Taper B 18
€16.49
*
Stock: 24
Taper arbor DIN 238, MT 5 / B 22
Taper arbor with morse taper shank, DIN 238 - completely hardened and ground - MT 5 - Taper B 22
€17.14
*
Stock: 16
Taper arbor DIN 238, MT 5 / B 24
Taper arbor with morse taper shank, DIN 238 - completely hardened and ground - MT 5 - Taper B 24
€17.86
*
Tap holder 10 x 3,5
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 10 mm Internal- Ø 3,5 mm
€33.48
*
Stock: 13
Tap holder 10 x 4,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 10 mm Internal- Ø 4,0 mm
€33.48
*
Stock: 24
Tap holder 10 x 4,5
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 10 mm Internal- Ø 4,5 mm
€33.48
*
Stock: 9
Tap holder 12 x 6,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 12 mm Internal- Ø 6,0 mm
€28.30
*
Stock: 23
Tap holder 14 x 7,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 14 mm Internal- Ø 7,0 mm
€28.30
*
Stock: 20
Tap holder 14 x 8,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 14 mm Internal- Ø 8,0 mm
€28.30
*
Tap holder 16 x 10,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 16 mm Internal- Ø...
€28.30
*
Stock: 24
Tap holder 16 x 9,0
Tap holder for machines with rigid tapping - suitable for standard Weldon chucks according to DIN 1835 B - no slip between tap holder and drill - 100% blade cooling if internal coolant supply is selected External- Ø 16 mm Internal- Ø 9,0 mm
€28.30
*
Stock: 30
Viewed