Lathe chucks and jaws
Top seller
No results were found for the filter!
Soft solid jaws for six-jaw lathe chucks Ø 250 mm
Soft solid jaws for lathe chucks Ø 250 mm material C45, 6 pieces per set
€214.92
*
Stock: 5
Soft solid jaws for six-jaw lathe chucks Ø 315 mm
Soft solid jaws for lathe chucks Ø 315 mm material C45, 6 pieces per set
€320.18
*
Stock: 4
Soft solid jaws for six-jaw lathe chucks Ø 400 mm
Soft solid jaws for lathe chucks Ø 400 mm material C45, 6 pieces per set
€464.47
*
Stock: 1
Stationary three-jaw lathe chuck, type 170
Stationary three-jaw lathe chuck, extra thin, type 170 - clamping range: 8 - 160 mm - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws - incl....
€811.73
*
Stock: 3
Stationary three-jaw lathe chuck, type 210
Stationary three-jaw lathe chuck, extra thin, type 210 - clamping range: 11 - 200 mm - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws - incl....
€967.90
*
Stock: 4
Stationary three-jaw lathe chuck, type 255
Stationary three-jaw lathe chuck, extra thin, type 255 - clamping range: 12 - 250 mm - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws - incl....
€1,373.76
*
Stock: 3
Stationary three-jaw lathe chuck, type 305
Stationary three-jaw lathe chuck, extra thin, type 305 - clamping range: 15 - 305 mm - 30° angle between wrench and base for easy of handling - extra thin chuck design increase machining space - may be used with hard or soft jaws - incl....
€1,873.22
*
Stock: 4
Hard base jaws for lathe chuck type SDF3-170
Hard base jaws for three-jaw lathe chuck type SDF3-170 - 3 pieces per set - for stationary three-jaw lathe chuck, extra thin type SDF3-170
€153.36
*
Stock: 2
Hard base jaws for lathe chuck type SDF3-210
Hard base jaws for three-jaw lathe chuck type SDF3-210 - 3 pieces per set - for stationary three-jaw lathe chuck, extra thin type SDF3-210
€168.70
*
Stock: 3
Hard base jaws for lathe chuck type SDF3-255
Hard base jaws for three-jaw lathe chuck type SDF3-255 - 3 pieces per set - for stationary three-jaw lathe chuck, extra thin type SDF3-255
€187.85
*
Stock: 1
Hard base jaws for lathe chuck type SDF3-305
Hard base jaws for three-jaw lathe chuck type SDF3-305 - 3 pieces per set - for stationary three-jaw lathe chuck, extra thin type SDF3-305
€289.44
*
Stock: 1
Three-jaw lathe chuck with angle drive, type 150
Three-jaw lathe chuck type 150 with angle drive - clamping range: 8 - 160 mm - angle drive with dual operation - extra thin chuck design increases machining space - may be used with hard or soft jaws / Incl. four-jaw lathe chuck...
€956.09
*
Stock: 2
Viewed