Lathe chucks and jaws
Top seller
No results were found for the filter!
Three-jaw lathe chuck with angle drive, type 200
Three-jaw lathe chuck type 200 with angle drive - clamping range: 8 - 180 mm - angle drive with dual operation - extra thin chuck design increases machining space - may be used with hard or soft jaws / Incl. four-jaw lathe chuck...
€1,121.04
*
Stock: 2
Three-jaw lathe chuck with angle drive, type 250
Three-jaw lathe chuck type 250 with angle drive - clamping range: 12 - 260 mm - angle drive with dual operation - extra thin chuck design increases machining space - may be used with hard or soft jaws / Incl. four-jaw lathe chuck...
€1,511.28
*
Stock: 2
Three-jaw lathe chuck with angle drive, type 300
Three-jaw lathe chuck type 300 with angle drive - clamping range: 15 - 300 mm - angle drive with dual operation - extra thin chuck design increases machining space - may be used with hard or soft jaws / Incl. four-jaw lathe chuck...
€2,110.82
*
Stock: 1
Stationary four-jaw lathe chuck, type 165
Four-jaw lathe chuck type 165, stationary - clamping range: 4 - 128 mm - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as...
€905.40
*
Stock: 1
Stationary four-jaw lathe chuck, type 200
Four-jaw lathe chuck type 200, stationary - clamping range: 5 - 162 mm - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as...
€1,061.50
*
Stationary four-jaw lathe chuck, type 250
Four-jaw lathe chuck type 250, stationary - clamping range: 6 - 200 mm - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck as...
€1,436.11
*
Stock: 2
Stationary four-jaw lathe chuck, type 310
Four-jaw lathe chuck type 310, stationary - clamping range: 10 - 265 mm - safe gripping of work piece (precision: 0,03 mm) - large work pieces can be held thanks to low profile body - able to grip square work pieces by using this chuck...
€1,998.14
*
Stock: 3
5C-collet chuck, centre mount
5C-collet chuck Ø 126 mm, centre mount - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange...
€204.41
*
Stock: 26
5C-collet chuck with radial fine adjustment
5C-collet chuck, centre mount with radial fine adjustment - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and...
€403.78
*
Stock: 4
5C-collet chuck with adapter, DIN 55027, taper 4"
5C-collet chuck with adapter DIN 55027 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange...
€544.32
*
5C-collet chuck with adapter, DIN 55027, taper 5"
5C-collet chuck with adapter DIN 55027 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange...
€611.21
*
5C-collet chuck with adapter, DIN 55029, taper 4"
5C-collet chuck with adapter DIN 55029 - can be used for turning, facing, boring, grinding and milling operations - the simple wrench operated scroll provides an uniform, distortion free clamping of workpieces and short collet exchange...
€544.32
*
Viewed