Products
Vice type NCK2 200 mm - mechanic - hydraulic- with pull-down mechanism- with quick adjustment- height tolerance ± 0.01 mm, suitable for side by side application- can also be laterally mounted- hardened bed HRC 45, body made from cast iron FCD 60
Work light 100-240V, protection level IP 65 - articulated arms for multiple adjustments- mounted with srews - arm length 120 mm (figure 1)
Work light 100-240V, protection level IP 65 - articulated arms for multiple adjustments- mounted with srews - arm length 200 + 200 mm (figure 2)
Work light 100-240V, protection level IP 65 - articulated arms for multiple adjustments- mounted with srews - arm length 400 + 400 mm (figure 3)
Work light 24V, protection level IP 65 - articulated arms for multiple adjustments- mounted with srews - arm length 105 mm (figure 1)
Work light 24V, protection level IP 65 - articulated arms for multiple adjustments- mounted with srews - arm length 200 + 200 mm (figure 2)
Work light 24V, protection level IP 65 - articulated arms for multiple adjustments- mounted with srews - arm length 400 + 400 mm (figure 3)
Work piece stop height 15 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm- for work pieces Ø 15 - 130 mm - material: aluminium
Work piece stop height 20 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm- for work pieces Ø 15 - 130 mm - material: aluminium
Work piece stop height 25 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm- for work pieces Ø 15 - 130 mm - material: aluminium
Work piece stop height 30 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm- for work pieces Ø 15 - 130 mm - material: aluminium
Work piece stop height 35 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm- for work pieces Ø 15 - 130 mm - material: aluminium
Work piece stop set, heights 15, 20, 25, 30, 35 mm - for clamping of short work pieces - is fixed by 3 magnets onto the chuck body - parallel ground - accuracy of ± 0,01 mm- for work pieces Ø 15 - 130 mm - material: aluminium
Wrench for coolant tubes - for HSK 100
Wrench for coolant tubes - for HSK 63
Wrench for lathe chucks 100/125 mm - ▢ 9
Wrench for lathe chucks 160/200 mm - ▢ 11
Wrench for lathe chucks 250/315 mm - ▢ 14
Wrench for lathe chucks 400 mm - ▢ 17
Wrench for lathe chucks 500/630 mm - ▢ 19
Wrench for lathe chucks 800 mm - ▢ 19
Zero adjuster, with external dial indicator - without magnetic base, with dial indicator Ø 40 mm- for determination of the work piece zero point - reading 3 x 0,01 mm
Zero adjuster, with external dial indicator - with magnetic base, with dial indicator Ø 40 mm- for determination of the work pieces zero point - reading 3 x 0,01 mm
Zero adjuster, with integrated dial indicator - for determination of the work piece zero point- with dial indicator Ø 40 mm- with magnetic base- reading: 2 x 0,01 mm- size: 61 x 54 x 52 mm