Products
Truncated 60° point centre - Bison type 8825 MT 6, size 6- DIN 228- for holding tubular workpieces
Tube centre ZKK-148 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 95 mm / D 148 mm
Tube centre ZKK-198 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 145 mm / D 198 mm
Tube centre ZKK-248 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 195 mm / D 248 mm
Tube centre ZKK-298 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 245 mm / D 298 mm
Tube centre ZKK-348 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 295 mm / D 348 mm
Tube centre ZKK-398 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 345 mm / D 398 mm
Tube centre ZKK-448 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 395 mm / D 448 mm
Tube centre ZKK-498 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 445 mm / D 498 mm
Tube centre ZKK-545 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø-D1 495 mm / D 545 mm
Tube centre ZKK-600 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 545 mm / D 600 mm
Tube centre ZKK-98 - for machining of pipes and hollow bodies- for base body type MGK / FGK - Ø: D1 45 mm / D 98 mm
Two angle swivel machine vice Bison 6530-100 - designed for milling, planing and drilling when two angle settings occur- up to 90° angle of incline from the horizontal position- 360° swivel base with ground contact edge and graduation- removable grooved jaw inserts are hardened and ground- fully covered lead screw protected against dirt and chips- incl. handcrank and slot nuts
Two angle swivel machine vice Bison 6530-125 - designed for milling, planing and drilling when two angle settings occur- up to 90° angle of incline from the horizontal position- 360° swivel base with ground contact edge and graduation- removable grooved jaw inserts are hardened and ground- fully covered lead screw protected against dirt and chips- incl. handcrank and slot nuts
Two angle swivel machine vice Bison 6530-160 - designed for milling, planing and drilling when two angle settings occur- up to 90° angle of incline from the horizontal position- 360° swivel base with ground contact edge and graduation- removable grooved jaw inserts are hardened and ground- fully covered lead screw protected against dirt and chips- incl. handcrank and slot nuts
Two-jaw lathe chuck DIN 6350 - centre mount- suitable for all types of lathes and different kinds of milling, drilling and CNC devices- especially suitable for holding multicornered and form turned elements, which cannot be clamped by 3- or 4-jaw lathe chucks- chuck body made from cast iron- guide ways and wear surfaces ground- scroll plate is drop forged of fine-alloy steel, and case hardened- incl. 1 set base jaws and soft reversible top jaws, wrench, fixing screws
Two-jaw lathe chuck DIN 6350 - centre mount- suitable for all types of lathes and different kinds of milling, drilling and CNC devices- especially suitable for holding multicornered and form turned elements, which cannot be clamped by 3- or 4-jaw lathe chucks- chuck body made from cast iron- guide ways and wear surfaces ground- scroll plate is drop forged of fine-alloy steel, and case hardened- incl. 1 set base jaws and soft reversible top jaws, wrench, fixing screws
Two-jaw lathe chuck DIN 6350 - centre mount- suitable for all types of lathes and different kinds of milling, drilling and CNC devices- especially suitable for holding multicornered and form turned elements, which cannot be clamped by 3- or 4-jaw lathe chucks- chuck body made from cast iron- guide ways and wear surfaces ground- scroll plate is drop forged of fine-alloy steel, and case hardened- incl. 1 set base jaws and soft reversible top jaws, wrench, fixing screws
Two-jaw lathe chuck DIN 6350 - centre mount according to DIN 6350- suitable for all types of lathes and different kinds of milling, drilling and CNC devices- especially suitable for holding multicornered and form turned elements, which cannot be clamped by 3- or 4-jaw lathe chucks- chuck body made from cast iron- guide ways and wear surfaces ground- scroll plate is drop forged of fine-alloy steel, and case hardened- incl. 1 set base jaws and soft reversible top jaws, wrench, fixing screws
Two-jaw lathe chuck DIN 6350 - centre mount- suitable for all types of lathes and different kinds of milling, drilling and CNC devices- especially suitable for holding multicornered and form turned elements, which cannot be clamped by 3- or 4-jaw lathe chucks- chuck body made from cast iron- guide ways and wear surfaces ground- scroll plate is drop forged of fine-alloy steel, and case hardened- incl. 1 set base jaws and soft reversible top jaws, wrench, fixing screws
Two-jaw power chuck NT-205 centre mount,with bore - serration 1,5 x 60° - type NT-205 Ø 135 mm - steel - all sliding surfaces are hardened and ground for high runout precision and long service life- lubrication nipple in each base jaw - jaws compatible with Kitagawa type BT200- incl. 1 set each of hardened base jaws and soft top jaws, fixation screws, blank draw tube adaptor
Two-jaw power chuck NT-206 centre mount,with bore - serration 1,5 x 60° - type NT-206 Ø 169 mm- steel- all sliding surfaces are hardened and ground for high runout precision and long service life- lubrication nipple in each base jaw- jaws compatible with Kitagawa type BT200- incl. 1 set each of hardened base jaws and soft top jaws, fixation screws, blank draw tube adaptor
Two-jaw power chuck NT-208 centre mount,with bore - serration 1,5 x 60° - type NT-208 Ø 210 mm- steel- all sliding surfaces are hardened and ground for high runout precision and long service life- lubrication nipple in each base jaw- jaws compatible with Kitagawa type BT200- incl. 1 set each of hardened base jaws and soft top jaws, fixation screws, blank draw tube adaptor
Two-jaw power chuck NT-210 centre mount,with bore - serration 1,5 x 60° - type NT-210 Ø 254 mm- steel- all sliding surfaces are hardened and ground for high runout precision and long service life- lubrication nipple in each base jaw- jaws compatible with Kitagawa type BT200- incl. 1 set each of hardened base jaws and soft top jaws, fixation screws, blank draw tube adaptor
Universal angle collet chuckfor collets ER40 (3-30) - 360° scale ring - tolerance ± 0,01 mm / 100 mm - 45° vertical tilting - vernier
Universal dividing head VUT type 134, MT 4 - any angle possible by direct or indirect indexing- direct indexing in 2, 3, 4, 6, 8, 12 and 24 sections - indirect indexing of all numbers from 2 to 50 and many numbers up to 380 possible (ratio 1:40) - easy conversion to direct indexing - horizontally / vertically tiltable from -10° to +90° - incl. tailstock and 2 dividing plates
Universal drill chuck with morse taper and tang - MT 3- capacity 1 - 16 mm - high precision - high concentricity, runout 0,03 mm max. - right and left rotation - high gripping force with minimal effort - short and sturdy design: tool shank and chuck are forming one unit - simple operation: quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal - suitable for CNC and high precision machine applications- scope of delivery: drill chuck incl. wrench
Universal drill chuck with morse taper and tang - MT 4- capacity 1 - 16 mm - high precision - high concentricity, runout 0,03 mm max. - right and left rotation - high gripping force with minimal effort - short and sturdy design: tool shank and chuck are forming one unit - simple operation: quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal - suitable for CNC and high precision machine applications- scope of delivery: drill chuck incl. wrench
Universal drill chuck with morse taper and tang - MT 5- capacity 1 - 16 mm - high precision - high concentricity, runout 0,03 mm max. - right and left rotation - high gripping force with minimal effort - short and sturdy design: tool shank and chuck are forming one unit - simple operation: quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal - suitable for CNC and high precision machine applications- scope of delivery: drill chuck incl. wrench
Universal drill chuck, DIN 2080 - shank SK 40- capacity 1 - 13 mm - high precision - high concentricity, runout 0,03 mm max. - right and left rotation - high gripping force with minimal effort - short and sturdy design: tool shank and chuck are forming one unit - simple operation: quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal - suitable for CNC and high precision machine applications- scope of delivery: drill chuck incl. wrench